Since 1981One stop for all your HVAC&R needs
CATALOGUE
The range.
Sizes, grades and quantities on request. Stock moves daily, so call before you travel for anything critical.
Copper pipe — soft drawn
OD 1.5 mm to 28.6 mm, wall 0.3 mm to 3 mm, in standard 50 ft (15.24 m) coils. Custom sizes can be sourced on order.
Copper pipe — hard drawn
For ACR, heat pumps, medical gas, gas lines and water lines. OD 3 mm to 150 mm, wall 0.3 mm to 10 mm, in standard 10 ft (3.05 m) straight lengths. Custom sizes can be sourced on order.
Copper elbow
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper long elbow
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper 45° elbow
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper coupling
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper tee
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper reducing tee
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper reducer
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper 'U' bend
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper cross
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Copper end cap
Sizes from 1/8″ up to 4-1/8″. Custom sizes can be sourced on order.
Brass union
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass elbow
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass tee
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass hex nipple
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass extension nipple
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass adaptor
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass reducing union
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass hose collar
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass bush
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass cross
Sizes from 1/8″ up to 2″. Flare / UNF / BSP / NPT / SAE threads. Custom sizes can be sourced on order.
Brass flare nut
Forged brass, 1/4″ to 3/4″, in the R22 and the R410A/R32 pattern. SAE 45° flare, UNF threads.
Brass long flare nut
Flare nut with a long shank that supports the tube. SAE 45° flare, UNF threads. Custom sizes can be sourced on order.
Brass flare union
Male SAE 45° flare on both ends, UNF threads, to join two flared tubes. Custom sizes can be sourced on order.
Brass half union (flare × NPT)
Male SAE 45° flare on one end, male NPT pipe thread on the other. Custom sizes can be sourced on order.
Brass flare tee
Male SAE 45° flare on all three ends, UNF threads. Custom sizes can be sourced on order.
Brass flare cross
Male SAE 45° flare on all four ends, UNF threads. Custom sizes can be sourced on order.
Nitrile rubber tube
Class 1 and Class 0, closed cell, 1/4″ to 4-1/2″ inner diameter (ID), 6 mm to 32 mm wall.
Nitrile rubber sheet
Closed cell sheet for ducting, plant rooms and flat surfaces.
XLPE insulation
Cross-linked polyethylene, tube and sheet forms.
EPDM insulation
Closed cell elastomeric, tube and sheet forms.
Thermorex insulation
Elastomeric insulation for chilled and refrigerant lines.
Acoustic insulation
Sound attenuation lining for ducting and plant rooms.
Glass wool
Mineral wool blanket and slab for thermal duty.
Rock wool
Mineral wool for higher temperature thermal duty.
Fibre glass sheet
Rigid fibre glass sheet for thermal lining.
Aluminium sheet
Cladding sheet over insulated pipe and duct runs.
Flaring tool
Eccentric flaring cone for copper tube ends.
Swedging tool
Expands tube ends for socket joints.
Tube cutter
Wheel cutter for copper tube.
Tube bender
Lever, spring, ratchet and PVC benders for soft copper.
Ratchet key
Ratchet service wrench for valve stems.
Manifold gauge set
Two and four valve manifolds with hoses.
Vacuum & recovery pump
Evacuation and recovery pump for refrigerant circuits.
Pinch off plier
Seals tube for leak isolation and repair.
Charging hose
Hoses with valve depressors for charging and recovery.
Pressure washer
For coil and condenser cleaning.
Washing cover
Catches wash water off wall and ceiling mounted indoor units.
Torch
Brazing torch for copper joints.
Tools bag
Service technician tool bag.
General tools
Spanners, drivers, pliers and consumables for service work.
R22
HCFC single component refrigerant.
R134a
HFC single component refrigerant.
R32
HFC single component refrigerant.
R410A
HFC blend for air conditioning.
R404A
HFC blend for commercial refrigeration.
R407C
HFC blend, R22 retrofit duty.
R600a
Isobutane, hydrocarbon refrigerant.
R1234ze
HFO low-GWP refrigerant.
R23
HFC low temperature refrigerant.
R508B
Low temperature blend for cascade systems.
SF6
Sulphur hexafluoride, dielectric and test gas.
Copeland
Copeland compressors
Scroll families for air conditioning and refrigeration, a finder and a quote form. Series ranges only where Copeland documents them.
Reciprocating compressor — hermetic
Sealed shell unit. Capacity and mounting on request.
Reciprocating compressor — open type
Belt or direct driven, external motor. Capacity on request.
Scroll compressor — fixed speed
Single speed scroll unit. Capacity and mounting on request.
Scroll compressor — inverter
Variable speed scroll unit. Capacity and mounting on request.
Screw compressor — twin screw
Twin rotor unit for larger plant. Capacity on request.
Screw compressor — single screw
Single rotor unit for larger plant. Capacity on request.
Expansion valves
Thermostatic and electronic expansion valves. Capacity and connection on request.
Solenoid valves
Coil operated shut-off valves for liquid and suction lines.
Ball valves
Full port shut-off valves for service isolation.
Service valves
Rotalock and line service valves for compressors and receivers.
Check valves
Non-return valves for discharge and liquid lines.
Pressure regulating valves
Evaporator, crankcase and condenser pressure regulators.
Safety & relief valves
Pressure relief for vessels and high side protection.
Hot gas valves
Hot gas bypass and defrost service valves.
Oil control valves
Oil level regulators and oil line control valves.
Reversing valves
Four-way valves for heat pump duty.
Float valves
High and low side float valves for flooded systems.
Access / charging valves
Access fittings with cap and core for charging and testing.
Pressure controls
High and low pressure cut-outs, manual and auto reset.
Temperature controls
Thermostats for room, coil and product temperature.
Digital controllers
Programmable controllers for refrigeration and cold rooms.
Defrost controllers
Timers and controllers for defrost cycles.
Fan speed controllers
Condenser fan speed regulation for head pressure control.
Compressor controls
Sequencing, capacity and safety controls for compressors.
Oil protection controls
Oil pressure differential and oil failure protection.
Motor protection
Thermal and electronic motor protection modules.
Electrical controls
Contactors, relays, timers and panel control gear.
Sensors & probes
Temperature, humidity and pressure sensors, probes and transducers.
Outdoor unit stand
Wall-mounting stand for split AC outdoor units.
Floor mounting stand
Floor stand that raises the outdoor unit off the ground.
Anti-vibration rubber pad
Rubber pads that cut vibration and noise under outdoor units.
Starting capacitor
Start capacitors for compressor motors, matched by µF and voltage.
Running capacitor
Run capacitors for compressor and fan motors, matched by µF and voltage.
Compressor relay
Starting relays for single-phase compressors.
OLP (overload protector)
Thermal overload protectors for hermetic compressors.
Contactor
Contactors for switching compressors and fan motors.
OLR (overload relay)
Thermal overload relays that trip a motor on sustained overcurrent.
Copper brazing rod
Copper-phosphorus rods for copper-to-copper joints; no flux needed.
Brass brazing rod
Brass filler rods, brazed with flux on steel and mixed-metal joints.
Silver brazing rod
Silver-bearing rods for copper-to-brass and copper-to-steel joints, with flux.
Brazing flux
Flux for silver and brass brazing.
Butane gas can
Butane cans for portable brazing torches.
Nitrile foam tape
Self-adhesive closed-cell foam tape for sealing insulation joints.
Aluminium foil tape
Foil tape for duct joints and foil-faced insulation.
Teflon tape
PTFE thread-seal tape for threaded joints.
PVC insulation tape
Electrical insulation tape for wiring joints.
BOPP tape
Clear packing tape for cartons and dispatch.
Duct tape
Cloth-backed tape for ducting and general repairs.
Fibre glass tape
Heat-resistant woven glass tape for wrapping and lagging.
Gasket tape
Sealing tape for panels, doors and gasket joints.
Cotton tape
Cloth tape for wrapping pipe and cable bundles.
Non-adhesive PVC tape
The usual outer wrap for split AC pipe, cable and drain bundles.
Copper foil tape
Adhesive copper foil tape for shielding and sealing.
Electrical wires & cables
Communication · Armoured · FRLS
Flexible communication cable
Signal and communication wiring between indoor and outdoor units, and in multi-split and VRF systems.
Armoured cable
Power supply runs that are buried or exposed to damage, such as feeds to outdoor units and plant rooms.
Shielded cable
Control and sensor wiring where electrical interference has to be kept out.
FRLS cable
Building wiring where fire-safety rules call for Flame Retardant, Low Smoke cable.
Copper pipe — common ACR sizes.
Soft coil and hard straight lengths. Wall thickness and grade to your specification — confirm sizes and trade price by phone.
| Size | OD | Form |
|---|---|---|
| 1/4″ | 6.35 mm | Soft coil / straight |
| 3/8″ | 9.52 mm | Soft coil / straight |
| 1/2″ | 12.70 mm | Soft coil / straight |
| 5/8″ | 15.88 mm | Soft coil / straight |
| 3/4″ | 19.05 mm | Soft coil / straight |
| 7/8″ | 22.23 mm | Soft coil / straight |
| 1-1/8″ | 28.58 mm | Straight length |
| 1-3/8″ | 34.93 mm | Straight length |
| 1-5/8″ | 41.28 mm | Straight length |
| 2-1/8″ | 53.98 mm | Straight length |
Larger diameters and other wall thicknesses can be sourced on order. Ask for the size you need.